No one can stop THE CLAW!

  How'd I do those claws??  Step 1:  Chop the top off the foot!

Step 2:  Set the claws in the hole just like you like'em.

Step 3: Tape the claws in place, then tape the piece you cut off over the top of the claws and then tape everything up real tight!

These claws ride slightly above ground level so as not to catch on anything in case someone  slides your creature around.  (Don't lie....you've seen people....friends, neighbors, maybe even your wife or kid do this!!)

Now we are getting somewhere.

  After a nice "no work" weekend, our dragon is back under way.  The upper head has a new ridge line on his head and snout, along with some horns.  The lower head got a small snout horn.  I have added the claws to the raised foot, and outfitted the arm with some tendons and muscle bulges.  Also beefed up his chest just a little.  I hope to mimic the claws on the other 3 feet, in a way that makes them appear retracted, like a cats.  Just hinting at them via ridges in the tops of the feet.  After that, some eyes and nostrils and this creature will be ready for the cloth mache ala Dan the Monsterman!

Heads will Roll

Isn't this cool!!  Got the jaws set in the heads and the heads attached to the necks.  I had to break and re bend the lower neck to get the head pointing the way I wanted.  I have started to tape on a little detail on the upper head with pieces of scrap papier mache, and newspaper pieces shaped and taped, then applied to the head.  Once the lower head has his nose ridge and eye brows, I'll give the taped area an application of papier mache to unify it all into one solid piece.  Then I'll add the eyes, nostrils and maybe horns or ears depending on what "seems right".
  *PS... this dragon is being built with techniques gleaned from Dan Reeder and his Paper Mache Monster book.  It was his book that opened the door to paper mache sculpture for me.  Check him out at...  www.gourmetpapermache.com  

JAWS

So here we are with 2 nice sets of (shhhhh..Dragon jaws), all equipped with teeth and tongues and a nice burnt blue paint job.    I have added a fuller belly, so he could eat more peasants, and changed the angles and elongated his necks, so the heads will reach out menacingly.  The necks have wires inside, so you just cut through the papier mache layer where you want to bend em, that way the papier mache won't crush.  Re position them as desired, and retape/remache and viola!
  I am hoping the papier mache goddess (aka my wife) brings me home a nice bag of flour today, as I am out.  Target's brand of flour is my personal fav.  Anyways, then we can add some heads, and ears....maybe horns, or spikes.... depends on how his heads shape up.   A pretty big project, huh?

Legs and heads

Here I've got the 4rth leg taped on and I've added a bit of a hump to his back.  Some new heads taped up to the side and its ready for an application of papier mache.  Looking at it now, I think he needs a bigger belly, and wings!!  Toes and claws for the feet too!  Look for a new post Monday with all his improvements.

The leg bones connected to the thigh bone...

  Last we spoke, I was taping up parts.  And here they are, all papier mached!  I don't  know exactly what they'll be, but I have an idea of where I want to start heading.  A lot more tape and some hot glue (yuk)....a little trimming to make things fit and there it is!!!!   Cool huh?
  After I tape appendages on to a body, I like to do another papier mache application over the whole critter, just to secure things and build up some more body strength.  After seeing him somewhat assembled, I think I may want to make him some bigger heads (AHA! you say!!)  So that's tomorrows project after this dries......The missing 4rth leg, and some new heads....and maybe a couple of other surprises.

Creature Feature

Started a new project today.  A special order piece.  Thought I might post step by step pix to document how I make a.....shall we call it a little beast for now.
  First off I just grab a big stack of newspapers and start wadding them up till I get a body mass the size I want.  This one is going to be lean and mean,  at least for today.  Tape him up pretty good, so he can't get away.  Add a tail, and some hips on the back end, and maybe a neck or 2 on the front, and tape all that up nice and tight.  Right now I just have a general idea of what I want and where this guy is going.  I'll tape up some more legs and heads too, then take them all down to the lab for the 1st layer of paper mache.